It is risky to connect to the power supply, so you need to be careful when operating. These steps cannot be omitted.
Avoid battery sudden “strike”
Need to start with daily maintenance
Develop some battery-friendly habits
Remember to turn off the electrical appliances in the car when parking
Don’t do it after turning off the flame
Continue to use air conditioners, speakers, etc. for long periods of time
To prevent the battery from over-discharging
When visiting the store for regular maintenance
Professionals at SAIC Volkswagen 4S store
It will detect the starting current and voltage of the battery, etc.
You can also check whether the electrolyte is leaking yourself
Make sure the battery surface is clean and free of corrosion
When your car is parked for a long time
Anti-theft systems and other electronic equipment
Still consuming power
It is recommended to start the car regularly to charge the battery
Avoid starting difficulties next time you use your car
In case the battery “unfortunately” loses power,
I need to call Jianghu for emergency help.
Let you quickly master the correct steps for powering up
The positive symbol of the battery is “+”
The negative symbol is “-”
Make sure not to mix things up while working
Be careful not to touch the connector when taking out the wires
Also do not allow the connector to come into contact with other metals
Confirm that the engines, headlights and other electrical appliances of both vehicles are turned off
Connect the two sections of the red cable to
The positive electrode of the battery of electric vehicles and powered vehicles
Connect one end of the black cable to the negative terminal of the power supply vehicle battery
The other end is connected to the metal parts on the engine block of the electric car
or a connection point in the engine compartment away from the battery
Before removing jumper cables
Note that the headlights must be turned off
And turn on the blower and rear window heater on cars without batteries
to reduce voltage spikes generated when removing cables
Then with the engine running
To remove the cables, follow the reverse order of connecting them.
Post time: Apr-07-2024